roof drip edge flashing rolling mach
Drip edge protects the fascia as it keeps water from running behind the gutter. Eliminates stained siding and rotted roof sheathing and fascia.
Used as a starter strip and provides an edge to line up the roof.
The working flow:
Uncoiling---Main roll former---Cutting device---Product collect table----Packing
Profile drawing of roof drip edge flashing:
Technical parameter:
Decoiler:
| Loading capacity | 1.5 Tons |
| Uncoiling width | 300 mm |
| Inner diameter |
450-550 mm |
| Structure | Iron plate welded structure |
Main roll forming machine:
| Voltage | 380V-3P-50HZ (Or as your request) |
| Drive mode | Chains drive |
| Material of roller | GCr12 Mov |
| Material of shaft | 45# steel with tempering |
| Shaft diameter | Φ 50 mm |
| Numbers of roller | 14 roller stations |
| Main motor power | 5.5+5.5 KW |
| Roll forming speed | 0-45 m/min |
Cutting system:
| Cutter material | Cr12 |
| Power supply | Hydraulic power with tracking cutting |
| Cutting power | 5.5 KW |
Receiving table:
| Quantity | 1 set |
| Length | 3 m |
| Motor power | 0.75 KW |
Hydraulic oil pump station:
| Hydraulic motor power | 3 KW |
| Hydraulic oil | 46# hydraulic oil |
| Cooling system | With cooling fan on it |
PLC control system:
| Language | English/Chinese or as your reuqest |
| Voltage | 380V-3P-50HZ or as your request |
| Length control | Yes |
| Speed control | Yes |
| Operating panel | Have buttons and touch screen |
| PLC brand | DELTA brand |
| Low voltage electrical apparatus | Schneider brand |
| Counter | Omron brand |
Here is more photos about V angle roofing sheet cold roll forming machine:
Our machine frame use vertical iron casting frame to ensure stable running, and use chains driving.
Will have protective cover box on it.
The roller use Cr 12 material, this kind of material hardness is more higher than other kind of material, then can provide more longer service life.
The rollers have heat treatment, chromed treatment, quenched treatment to ensure it's quality.
For the cutting device, we adopt tracking cutting to imporve the cutting speed, the machne speed max can reach to 40 m/min.
About the product collect tablel and packing device, we adopt automatic type.
The product collect table can transfer the product automatically to packing table.
steel rolling machines_industrial steel rolling machines_steel plate rolling machines_steel re rolling machine_roll forming machine - ZhongTuoCN SteelRollingMachines
Add：Silver Spring, plot no G-6, A-wing, Shop no 20/21,opp. Dena Bank, Taloja Midc, Raigad, Maharashtra, India- 410208 Factory: Botou city, Hebei Province, China
whatsApp/Wechat:+86-18733770188
·Your personal informations