Z Purlin Roll Forming MachineWe are the prominent Manufacturer & Exporter of Z Purlin Roll Forming Machine that is made by using the premium quality Equipment. Our Z Purlin Roll Forming Machine is inflexibly checked to ensure the high performance and long life Durability. This Z Purlin Roll Forming Machine is widely used as the supporter of roof and wall ceiling in construction segment, such as Many Industries, Godown , trade fair centers. Z shape purlins are made from hot cold roll tools and straighten, hole punched, cut to length,and roll former. You can Form different kind of profile in this machine.
D coiler 2 ton cap.
Punching press 20 tone 2 nos.
Entry Gate with
Roll Forming Line with 14 station, 7 Gear Boxes & 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Maximum sheet width that can be formed : 450mm
Maximum sheet thickness in CRCA Strips that can be formed : 2 mm(M.S.)
Horizontal distance between shafts : 400mm
Number of forming stations : 14 nos.
Vertical station : 12 nos.
Total HP for Line : 16
Speed of the machine : 4mt/minit
Size of machine : 11300 x 1800 x 1200 mm
Coil weight : 2 MT Max
Coil width : 400 MM
Coil bore : 450 MM min, 510 MM max dia
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
20 tone power press
2 nos. 3 HP
EnRoller roofing making machinetry gate will be provided for movement of sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
The roll shafts dia. 55mm will be manufactured from quality steel and will be keyed to locate tooling.
The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 10 HP motor
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.